Frequently Asked Question

Tile adhesive is a substance used to bond tiles to surfaces like floors and walls. In order to ensure that tiles stay firmly in place, tile adhesive is used to bond tiles to surfaces such as floors and walls. Various types of tile adhesives are available, and selecting the appropriate one for your application will depend on the type of tile, the surface, and the environment in which the tiles will be installed. If you are planning a tiling project, we would be happy to assist you in selecting the best adhesive!

Indeed, when it comes to fixing tiles and stones, tile adhesive is ultimately a preferable option than conventional cement-sand mortar. Here are a few main benefits:

• Strong Bonding
• Consistency
• Ease of Use
• Water Resistance
• Flexibility
• Faster Installation
• Durability and ease of use

Are you working on a specific project where you need to choose between these options? We would be happy to help with more detailed advice!

For a solid and long-lasting bond, tile adhesive must be mixed correctly. The steps to mix tile adhesive are as follows:

Read the Instructions: Always start by reading the application instructions on the adhesive packaging. This will give you the correct water-to-powder ratio.

Prepare Your Tools: You will need a clean bucket, a mixing paddle, and a drill. Make sure all tools are clean to avoid contamination.

Add Water First: Pour the required amount of clean, cold water into the bucket. Adding water first helps prevent lumps.

Add Adhesive Powder: Gradually add the adhesive powder to the water. This helps in achieving a smooth consistency.

Mix Thoroughly: Use the mixing paddle attached to the drill to mix the adhesive. Mix until you get a smooth, lump-free consistency. This usually takes about 3-5 minutes.

Let It Slake: Allow the mixture to sit for a few minutes (as per the manufacturer’s instructions). This process, known as slaking, helps the chemicals in the adhesive to activate.

Re-mix: After slaking, give the adhesive a quick re-mix to ensure it’s ready for application.

Use Promptly: Apply the adhesive within the working time specified in the pack to ensure optimal performance.

Laying new tiles over old ones is possible, but it depends on the condition of the existing tiles and the underlying surface. If the old tiles are well-bonded to a solid base without any cracks, and the surface is level, you can consider tiling over them. However, if there are loose or damaged tiles, or if the surface is uneven, it’s recommended to remove the old tiles first.

Are you planning to renovate a specific area? If you need more detailed advice or have any other questions, feel free to ask!

No. Complete removal of the paint is recommended for optimal outcomes. The effects of applying a fresh tile finish over a painted surface cannot be predicted in the long run. The paint may separate from the substrate by peeling, chipping, or in some other way. Mechanical abrasion is the most effective technique for paint removal. A polluted substrate may arise from the application of chemicals to remove paint.

Ensure that the current concrete is devoid of items that would break or hinder bonds, dry, and structurally sound. Materials that hinder bond formation can be sealants, waxes, oils, curing chemicals, dirt, grease, paint, old adhesives, cement laitance, etc. Before installing any tile or stone directly onto the concrete, any of these materials that may have been on it must be totally removed.

For the grout joint is 1/8″ (3 mm) or less, use unsanded grout for soft marble, polished marble, various soft stone varieties, some polished stone, and soft glazed tiles.

Ready-to-use, self-curing, non-shrinking grey cement based adhesive like TrueBond Blocfix which is a block bonding adhesive that can be used to join fly ash bricks, concrete blocks, AAC blocks, and other materials of a like kind.

Using a notched trowel, apply a thin coating of adhesive to the AAC block’s surface after wetting the block with a sponge. To guarantee a strong binding, position the block and press it firmly. Make sure the adhesive is distributed evenly by repeating the procedure with every block.

In accordance with the technical sheet’s directions, mix the adhesive. Using a notched trowel, apply it to the surface, making sure the layer is equal. After positioning, firmly press the blocks into the adhesive. Permit the adhesive to cure according to the instructions.

AAC block cracks can result from a number of factors, including inadequate curing, thermal expansion, or structural movement. Crack risk can be reduced by making sure installation and curing are done correctly.

Plastering is usually necessary for AAC blocks in order to give them a smooth finish and extra protection. However, compared to traditional bricks, plastering is typically a simpler procedure that uses less material.

Wall putty is a powder made of white cement and otehr polymer additives that is applied to walls to smooth them out before painting. It provides an ideal base for paint by filling up dents, fissures, and other flaws.

Indeed, cement-based wall putty is durable and suited for outdoor use.

Surface Preparation: Spot clean and take out any loose debris from the wall.

Mixing: Using water, blend the putty until it has a smooth consistency.

Application: Use a putty knife to apply the putty in thin layers.

Smooth Surface: Offers a uniform and smooth surface for painting.

Durability: Increases paint’s resistance to chipping and peeling.

Resistance to Moisture

The first coat usually takes 6 to 8 hours to dry, though this might vary. It is advised to wait a full day before applying the second layer.

Applying wall putty on wet walls is best avoided. Before applying, make sure the wall is dry to avoid problems with durability and adhesion.

Wall putty is appropriate for do-it-yourself projects. Applying it is rather simple if you have the correct equipment and guidance.

A pre-measured and pre-blended mixture of cement, fine-screened sand, and polymer additives makes up ready-mix plaster.

It is convenient and reliable for plastering applications because all it takes to get started is a little water.

Consistency: Lowers the possibility of mistakes by ensuring a consistent mix each time.

Time-saving: The application procedure is accelerated by doing away with the requirement for on-site mixing.

Quality: Contains premium ingredients that improve the plaster’s finish and longevity.

Surface Preparation: To guarantee good adherence, clean and moisten the surface.

Mixing: To get a smooth consistency, add the necessary amount of water to the ready-mix plaster and mix.

Application: Using a trowel, apply the plaster in thin layers, letting each coat dry completely before adding the next.

Finishing: To get the required finish, use a trowel or float to smooth the surface.

Yes, exterior and interior walls can be covered with ready-mix plaster. It is made to resist a range of weather circumstances.

Depending on the application’s thickness and the surrounding weather, the drying time may change. It normally takes between 24 and 48 hours to dry completely.

High precision grout is a high-strength, non-shrink grout used for applications requiring precise alignment and support, such as machinery base plates, columns, and structural elements.

Non-Shrink: Ensures stability and maintains volume after curing.

High Strength: Provides excellent load-bearing capacity.

Versatility: Suitable for various applications, including industrial and structural uses.

Durability: Resistant to cracking and weather conditions.

Preparation: Clean the mixing equipment and ensure the surface is free of contaminants.

Mixing: Add the required amount of water to the grout powder and mix until a smooth, lump-free consistency is achieved. Follow the application instructions for the correct water-to-powder ratio.

Application: Pour the grout into the prepared area, ensuring it flows evenly and fills all voids. Use a trowel or other tools to help distribute the grout if necessary.

Machinery Base Plates: Provides a stable and level base for heavy machinery.

Structural Columns: Ensures precise alignment and support for columns.

Anchoring: Used for anchoring bolts and other structural elements.

Repair Work: Suitable for repairing cracks and voids in concrete structures.

The curing time can vary depending on the specific product and environmental conditions. Generally, it takes about 24-48 hours to achieve initial set, with full strength developing over 7-28 days.

Yes, high precision grout is suitable for both interior and exterior applications. It is designed to withstand various weather conditions and provide long-lasting performance.

A floor top hardener is a material applied to concrete surfaces to increase their wear resistance, durability, and strength. It is commonly used in industrial and commercial settings to enhance the lifespan of concrete floors.

Increased Durability: Enhances the surface hardness and resistance to abrasion.

Dust Reduction: Reduces dusting from the concrete surface.

Improved Appearance: Provides a smoother and more uniform finish.

Chemical Resistance: Offers better resistance to chemicals and oils.

Surface Preparation: Clean the concrete surface thoroughly.

Application: Spread the hardener evenly over the surface using a spreader or by hand.

Floating: Use a float to work the hardener into the surface.

Trowelling: After the hardener has absorbed moisture from the concrete, trowel the surface to achieve the desired finish.

Yes, floor top hardeners can be applied to both new and old concrete floors. However, the surface must be properly prepared to ensure good adhesion.